Lime should not be used because it is a depressor of free gold and inhibits pyrite flotation. Sodium sulphide is often helpful in the flotation of partly oxidized sulphides but must be used with caution because of its depressing action on free gold. Copper sulphate is frequently helpful in accelerating the flotation of pyrite and arsenopyrite.
The effect of the parameters such as pH, pulp density, particle size and collector amount were investigated. KAX was used as collector and Dow-250 was used as frother. Key Words: Sulfurization, flotation, copper, gold, silver 1. INTRODUCTION Flotation has been utilized in the mineral processing industry to concentrate base
The recovery of these copper minerals by flotation or hydrometallurgy from ores, typically containing 0.5%TCu (open pit mines) and 1-2%TCu (underground mines) is of great commercial importance
The Effect of Sulfurization Process on Flotation of Copper Ore Containing Gold and Silver Article (PDF Available) in Journal of Minerals and Materials Characterization and Engineering 7(3):193-202
The Effect of Collector's Type on Gold and Silver Flotation in a Complex Ore and a porphyry copper-gold ore. It was found that the presence of TMT had no discernible effect on adsorption
Six flotation tests were conducted using the copper–gold ore and its mixtures with quartz, clay minerals and gypsum. Fig. 1 shows the mass recovery as a function of water recovery from these tests. As can be seen, flotation of the ore or baseline resulted in a 5% mass recovery and 31% water recovery at the completion of flotation.
An example of testing the effect of pH on rougher flotation on pit samples and the results are presented. Since this is only an example, it needs reminding that not all ores will respond the same. Here, rougher flotation is most Selective at a pH of 9.5 as pH levels in the 9 to 10 range yielded 1% to 2% better recoveries. Mineralogy data also supports this and shows between 3% and 10% of the
I have been given a project on optimization of copper concentrate grade so as to improve copper and gold recovery. I need help on the main factors which I have to consider in my project. The targeted copper concentrate grade at the plant is 18- 20%Cu, but currently the target is not achieved. Froth Flotation (Sulphide & Oxide)
Most of the soluble minerals were present as sulphates. The next step was to determine the effect, on flotation, of the various sulphates. Sodium and potassium sulphates, when added to fresh tests in the proportion indicated in the analysis, yielded a 13 oz. tailing and a 650 oz. concentrate; thus producing a marked increase in the grade of concentrate without detrimental effect on the tailing.
The effect of copper activation on the behaviour of free and refractory gold during froth flotation. This study is aimed at explaining the effect of copper activation in flotation systems which contain free gold and gold locked in pyrrhotite and pyrite. Unlike other studies, the effect of the sequence and amount of copper added to the
When reviewing Methods of Eliminating Copper from Gold Ores we see that several methods have been suggested to eliminate copper from ores prior to cyanidation. Preliminary extraction of the copper with sulphuric or sulphurous acids may be applicable to ores containing oxidized copper minerals such as malachite, azurite and chrysocolla but these acids have but little effect on sulphide copper
Optimisation of gold recovery by selective gold flotation 233 Lins and Adamian also conducted an investigation into the effect of pulp density on the grade of the concentrate produced by varying the pulp density on the four gold particle sizes. The grade increased with
The effect of the lysed cells on copper and gold flotation recovery was different. Fig. 5 shows that the relative recovery decrease of gold was more remarkable than that of copper, especially at higher concentrations of the lysed cells. This corresponded to an increase in the selectivity index between copper and gold calculated by dividing
The ores from which silver and gold are recoverable by flotation divide themselves naturally into two general processing classes: ores in which the valuable minerals are those of the base metals, the precious metals being incidental constituents, and ores in which the gold and silver are of primary importance, the base-metal minerals, if present, being of little or no value. The first class
A conceptual model for gold flotation 1003 O'Connor et al. [4] provided further evidence that the recovery of a refractory gold bearing sulphide would enhance gold recoveries by investigating the flotation of refractory arsenopyrite using mixtures of dithiophosphate and dithiocarbamate.
Flowsheet for treatment of Copper Sulfide ores rich in minerals such as chalcopyrite with gold and silver as well as arsenopyrite. The above flowsheet is designed for the treatment by flotation of copper as chalcopyrite with gold and silver values. The ore, ranging from 60-65% silica, with pyrite, arsenopyrite, and calcite with 3 to 4% copper
Flotation will frequently be used when gold is recovered in conjunction with other metals such as copper, lead, or zinc. Flotation concentrates are usually sent to an off-site smelting facility for recovery of gold and base metals. Cyanide leaching is frequently used in conjunction with flotation. Cyanidation of flotation concentrates or
This is a case at the Hidden Valley (HV) Mine. In this study, the effect of free and WAD cyanides on gold and silver recoveries by flotation from the HV Mine was considered. WAD cyanide (WAD CN) was prepared by mixing sodium cyanide and copper sulfate at a cyanide to copper ratio of 3:1 dosed at different cyanide concentrations.
Sep 24, 2018· Although copper flotation and the effect of key parameters and operational conditions have been studied previously [2, 3, 10, 31], the main focus of these studies have been the impact of each individual operational condition on the recovery of the flotation process. The combined effect of these factors on each other and on the efficiency and
The polymetallic separation flowsheet of copper/lead bulk flotation–copper lead separation–priority floating zinc and pyrite from the bulk flotation tailings was used based on the ore properties. The flowsheet principles used in the experiment is shown in Figure 1. use con.as Concentrate, The following are the same as feed
Oct 25, 2018· The objective of the current work was to investigate chloride leaching of gold, copper, cobalt, nickel, and zinc present in the flotation tailings. In the current study, the effect of cupric ion as an oxidant (0–50 g/L) and NaCl (150–250 g/L) on metals extraction was investigated.
Clay depressant in a gold and copper bulk flotation plant trial. In production at a Gold and Copper flotation circuit the use of PIONERA F-100 showed a recovery increase in gold of 5% and a positive effect on the copper recovery by successfully depressing clay in the bulk flotation process.
In this study, the effect of different cations, Na+, K+, Mg2+ and Ca2+ with the same anion, Cl−, on the rheology of a copper-gold ore in the presence of bentonite and copper flotation was
– 17 Flotation of Gold Ores 17.1 INTRODUCTION copper ore, gold antimony ores, etc.), because the flotation methods used for the recovery negative effect on gold flotation. Use of lime often results in the depression of native gold and gold-bearing sulphides. The optimum flotation pH ranges between 8.5 and
Oct 25, 2018· The objective of the current work was to investigate chloride leaching of gold, copper, cobalt, nickel, and zinc present in the flotation tailings. In the current study, the effect of cupric ion as an oxidant (0–50 g/L) and NaCl (150–250 g/L) on metals extraction was investigated.
Clay depressant in a gold and copper bulk flotation plant trial. In production at a Gold and Copper flotation circuit the use of PIONERA F-100 showed a recovery increase in gold of 5% and a positive effect on the copper recovery by successfully depressing clay in the bulk flotation process.
In this study, the effect of different cations, Na+, K+, Mg2+ and Ca2+ with the same anion, Cl−, on the rheology of a copper-gold ore in the presence of bentonite and copper flotation was
Figure 2. Effect of aeration condition on (a) gold flotation rates and (b) gold flotation behaviour in different test conditions (Cu rougher feed aerated and non-aerated) using SIBX/XD5002 as collector, p80=38 µm. However, when the copper rougher tails (Test 1, Test 2 and Test 3) were reground, only 25% of the total gold lost was
– 17 Flotation of Gold Ores 17.1 INTRODUCTION copper ore, gold antimony ores, etc.), because the flotation methods used for the recovery negative effect on gold flotation. Use of lime often results in the depression of native gold and gold-bearing sulphides. The optimum flotation pH ranges between 8.5 and
Separating Flotation Gold From Pyrite. The effect of sulfurization process on flotation of copper ore doiome research documented on the flotation of gold bearing pyrites 3 and arsenopyrite 4n order to achieve an efficient separation by flotation, copper oreet price. Read More; Flotation In Mining Copper And Gold Oxide Ore
This stone investigates the effects of thiol collectors: xanthates, dithiophosphates, dithiocarbamates and mixtures of these on the froth flotation performance obtained with a bornite-rich copper sulphide ore from Okiep Copper Mine with a feed grade of 1.8% copper. Batch flotation tests were used to assess the performance in
Copper–gold ores are significant contributors to the overall world gold production. Flotation is the principal process for pre-concentration of the copper–gold minerals for subsequent smelting treatment. Gold recovery, although important, is not always considered when optimizing the copper circuit.
Mining Equipment Copper Flotation Cell Price Flotation Machine. Gold Refining Machine Copper Mining Equipment Flotation. New Designed Chrome Ore Flotation Machine suitable for separation of nonferrous metals ferrous metals precious metalsnonmetallic mineral and stone raw materials recovering use machine has the features of the big.
The flotation of gold and silver minerals is mostly carried out in alkaline pulp medium, but for some gold-bearing pyrite and pyrrhotite, it is suitable for flotation in weak acid pulp medium. Oxygen has an effect on the flotation process of gold-silver sulfide ore oxidized to different degrees.
The Effect Of Sulfurization Process On Flotation Of . Flotation behavior of gold in synthetic mixtures and not when it is a component of a real ore containing other gold bearing sulphide minerals and siliceous gangue There are also some research documented on the flotation of gold bearing pyrites 3 and arsenopyrite 4 However these studies have
Dec 10, 2013· Read "Effect of regrinding conditions on pyrite flotation in the presence of copper ions, International Journal of Mineral Processing" on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at your fingertips.
The copper-free loaded carbon was easily treated for gold with very high elution and electrowinning efficiencies of 96 and 98% respectively. A bullion of high fineness (in the region of 98% gold and silver) was obtained and the activity of carbon after elution was reasonably high at 8 0% of virgin carbon. One detrimental effect of the changes
Froth flotation. Froth flotation is a process for selectively separating hydrophobic materials from hydrophilic. However, because the Bessel process was used on graphite not gold, silver copper, lead, zinc, etc, their work has been ignored by most historians
Copyright © 2019 Peter&X Industry & Technology Group Co., Ltd. | sitemap